2023 Consumer Confidence Report
2023 Consumer Confidence Report
2023 Consumer Confidence Report reported in 2024
ANNUAL DRINKING WATER QUALITY REPORT
VILLAGE OF MAHOMET, ILLINOIS
For the period of January 1 to December 31, 2023
This year, as in years past, your tap water met all USEPA and State drinking water health standards, our system vigilantly
safeguards its groundwater supply, and we are able to report that the department had NO violation of a contaminant level or of any other water quality standard in the previous year.
This report summarized the quality of water that we provided last year, including details about where your water comes
from, what it contains, and how it compares to standards set by regulatory agencies.
Due to favorable monitoring history, aquifer characteristics, and inventory of potential sources of contamination, our water supply was issued a vulnerability waiver renewal. No monitoring for VOC’s and SOC’s is required between January 1, 2022 and December 31, 2022.
For more information regarding this report, contact: Matt Gregory, Water/Wastewater Operator at 217/586-4456.
PFAS Detections
In 2021, our PWS was sampled as part of the State of Illinois PFAS Statewide Investigation. Eighteen PFAS compounds were samples, and none were detected in our finished drinking water. For more information about PFAS health advisories https://epa.illinois.gov/
In 2021, our PWS was sampled as part of the State of Illinois PFAS Statewide Investigation. Eighteen PFAS compounds were sampled, and none were detected in our finished drinking water. For more information about PFAS health EPA.
Source of Drinking Water
The Village of Mahomet uses groundwater provided by three wells, drilled into the Mahomet aquifer. An aquifer is a geological formation that contains water. All three of the wells are located within the Village limits. Wells #4, #5, & #6 are all utilized on a daily basis. Water from the wells is pumped to the treatment plant, for filtration, softening, fluoridation and chlorination.
The sources of drinking water (both tap and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs and groundwater wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.
Contaminants that may be present in source water include:
Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations and wildlife.
Inorganic contaminants, such as salt and metals, which can be naturally occurring or result from urban storm water runoff, industrial, or domestic wastewater discharges, oil and gas production, mining or farming.
Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.
Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems.
Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some
contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the EPA’s Safe Drinking Water
Hotline at (800) 426-4791.
In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water which must provide the same protection for public health. Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-comprised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care
providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-426-4791).
Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly and infants can be particularly at risk from infections. These people should seek advice about EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-426-4791).
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children.
Leak in drinking water is primarily from materials and components associated with service lines and home plumbing. We cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at EPA.
Source Water Information
Source Water Name | Type of Water | Report Status |
WELL 4 (00667) | GW | Active |
WELL 5 (00668) | GW | Active |
WELL 6 (01756) | GW | Active |
A Source Water Assessment summary is included below for your convenience.
We want our valued customers to be informed about their water quality. If you would like to learn more, please feel welcome to attend any of our regularly scheduled meetings, on the second Tuesday of each month at 6:00 p.m. at the Village Administration Office, 503 E. Main Street.
The source water assessment for our supply has been completed by the Illinois EPA. If you would like a copy of this information, please stop by Village Hall or call our Water Operator at 217/586-4456. To view a summary version of the completed Source Water Assessments, including, Important of Source Water; Susceptibility to Contamination Determination and documentation/recommendation of Source Water Protection Efforts, you may access the Illinois EPA website at Epa.
Based on information obtained in a Well Site Survey, published in 1989 by the Illinois EPA, one potential secondary source (also an on-going leaking underground tank remediation site) is located 840 feet from Well #4 and 740 feet from Well #5.
Furthermore, information provided by the Leaking Underground Storage Tank Section of Illinois EPA indicated several additional sites with on-going remediation which may be of concern. However, these sites have not been field verified by the Groundwater Section staff and may or may not be located in proximity to the Village’s source water protection area.
The Illinois EPA has determined that the Mahomet Community Water Supply’s source water has a low susceptibility to contamination. This determination is based on a number of criteria including monitoring conducted at the wells’ monitoring conducted at the entry point to the distribution system, and the available hydrogeologic data on the wells.
In anticipation of the U. S. EPA's proposed Ground Water Rule, the Illinois EPA has determined that the Mahomet Community Water Supply has a low susceptibility to viral contamination. This determination is based upon the completed evaluation of the following criteria during the Vulnerability Waiver Process: the community's wells are properly constructed with sound integrity and proper site conditions; a hydrogeologic barrier exists that prevents pathogen movement; all potential routes and sanitary defects have been mitigated such that the source water is adequately protected; monitoring data did not indicate a history of disease outbreak; and the sanitary survey of the water supply did not indicate a viral contamination threat. Because the community's wells are constructed in a confined aquifer, that could minimize the movement of pathogens into the wells, well hydraulics were not considered to be a significant factor in the susceptibility
determination. Hence, well hydraulics were not evaluated for this groundwater supply.
2021 Regulated Contaminants Detected Lead and Copper
Definitions: Action Level Goal (AGL): The level of a contaminant in drinking water below which there is no known or expected risk to health. ALGs allow for a margin of safety.
Action level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system
Lead/Copper | Date Sampled | MCLG | Action Level | 90% | # Sites Over All | Units | Violation | Likely Source of Contamination |
Copper | 07/08/2021 | 1.3 | 1.3 | 1.1 | 0 | ppm | No | Erosion of natural deposits; Leaching from wood preservatives; Corrosion of household plumbing systems. |
Lead | 07/08/2021 | 0 | 15 | 2.7 | 1 | ppb | No | Corrosion of household plumbing systems; Erosion of natural deposits. |
Water Quality Test Results
Definitions: The following tables contain scientific terms and measures, some of which may require explanation.
Avg:
Regulatory compliance with some MCLs are based on runningLevel 1 Assessment:
A Level 1 assessment is a study of the water system to identify potential problems and determine (if possible) why
total coliform bacteria have been found in our water system.Level 2 Assessment:
A Level 2 assessment is a very detailed study of the water system to identify potential problems and determine
(if possible) why an E. coli MCL violation has occurred and/or why total coliform bacteria have been found in our
water system on multiple occasions.Maximum Contaminant Level (MCL):
The highest level of a contaminant that is allowed in drinking water. MCL's are set as close to the Maximum
Contaminant Level Goal as feasible using the best available treatment technology.Maximum Contaminant Level Goal (MCLG):
The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLG's
allow for a margin of safety.Maximum Residual Disinfectant Level (MRDL): The highest level of a disinfectant allowed in drinking water.
There is convincing evidence that addition of a disinfectant is necessary for control of microbal contaminents.Maximum Residual Disinfectant Level Goal (MRDLG): The level of drinking water disinfectant below which there is no
known or expected risk to health. MRDLG's do not reflect the benefits of the use of disinfectants to control microbal
contaminants.
Glossary: | |
na | not applicable |
mrem | millirems per year (a measure of radiation absorbed by the body) |
ppb | micrograms per liter or parts per billion - or one ounce in 7.350,000 gallons of water |
ppm | milligrams per liter or parts per million - or one ounce in 7.350,000 gallons of water |
TT | Treatment Technique(A required process intended to reduce the level of a contaminant in drinking water.) |
Regulated Contaminants
|